The Content Of The Article:
  • 4. Maintenance of a shower, fight against moisture problems
  • 5. Maintenance of a natural shower
  • The shower gaskets ensure the watertightness of your installations and prevent the water from seeping in. However, they tend to get dirty quickly because of moisture, soap and limescale and see the mold settle quickly. There are natural and economical solutions to give them a new shine and as a last resort, it is always possible to replace them.

    Blackened or molded shower gaskets: what to do?

    Blackened or molded shower gaskets: what to do?

    Natural solutions for cleaning the joints of a shower

    There are a multitude of natural and economical solutions for cleaning blackened shower gaskets and eliminating traces of mold.

    • The White vinegar Also called household vinegar is very used to clean the house. Mixed with ammonia, baking soda or washing up liquid, it is very effective for cleaning joints. You can also use it pure with a toothbrush to get rid of stubborn stains.
    • Bleach, even if it is more harmful for health, is recognized for its whitening properties. It is applied with a cotton swab directly on the joint.
    • Black soap is also very appreciated as well as the lemon juice which, thanks to its acidity, manages to whiten the dirtiest joints.
    • It is also possible to use a steam cleaner but if dirt and molds persist, there are other alternatives.

    Hide the mildew on a shower joint

    If you are unable to clean the joints of your shower correctly, it is also possible to hide the traces with a whitening pen. Like a correction pen, simply apply the product with a nozzle directly on the joints and let dry. You can also opt for a special tile joint paint that will hide any unsightly stains. This is certainly not the ideal solution but it can give a boost to your shower!

    How to replace a shower seal?

    In case of very fouled joints, there is an ultimate and radical solution which is change the joints. The operation is not very complicated to realize but be careful however to do all the possible care to ensure the perfect seal joints. First of all, remove the damaged seal with a knife or razor blade. If it does, use a little acetone to help it come off. Once the seal has been removed, clean the holder, remove any remaining seal, rinse and dry. The surface must be perfectly dry to be able to apply the new seal. Using a gun, apply the silicone and smooth with your finger slightly moistened. Let dry a few hours before using your shower.

    Video Instruction: How to clean the grout between your wall tiles and revamp mouldy mastic.