The Content Of The Article:

AVIDSEN gate drives

The gate operator is both an element of comfort and safety. Comfort because it dispenses with having to get out of the car in bad weather; safety in more than one way, since it reduces the time in front of the entrance of the garden, eliminates the risk of accidents due to parking and the descent of the vehicle to open the gate, finally because the system prevents risks car-jacking (theft of the vehicle and aggression when one leaves).

Whether swinging or sliding, in wood, steel or PVC, there is a solution in the AVIDSEN range of remote door opening systems. The installation is not very complicated but must meet the requirements of safety, especially along the road. They can be powered by solar energy. All benefit from maximum safety with automatic shutdown in the event of an obstacle, detectable by photocells. They are turned on by remote control.

Swing gates

Cylinder gate operator kit KHÉA AVIDSEN

Cylinder gate operator kit KHÉA AVIDSEN

The ANTHÉA system is suitable for gates with 2 leaves of 3 m in total, weighing less than 220 kg. The opening is inward, at a maximum angle of 110°. The cylinders are driven by a worm motor. The control unit is self-programming and has a quick connect system. The set is associated with a flashing light, a set of photocells and two remote controls.

ORANE articulated arm drive kit

ORANE articulated arm drive kit

Same configuration as that of the kit ANTHÉA but for gates with 2 leaves of 3.50 m in total, weighing up to 300 kg. The opening is inward or outward at a maximum angle of 120°.

ORANE articulated arm drive kit

ORANE articulated arm drive kit

Articulated arm systems are used for heavy wide gates. The ORANE model allows to move the two leaves of a portal of 5.50 m wide and 550 kg in total. The opening is inward thanks to two motors articulated arm with integrated electronics. The system has a backup battery. The operating process is slowed down at the start and end of the race. Opening stops are built into the motors.

Sliding gate

Sliding gate operator kit ZÉNIA AVIDSEN

Sliding gate operator kit ZÉNIA AVIDSEN

The motorization of the sliding gates is done by a rack and a motor with notched wheel. The ZÉNIA model is suitable for a gate of 4 m and 200 kg. The opening can be done to the right or to the left.

Sliding gate operator kit ORÉA AVIDSEN

Sliding gate operator kit ORÉA AVIDSEN

The ORÉA model benefits from a contemporary design. It is suitable for gates 8 m long and 350 kg. The opening will be to the right or to the left.

On the same topic

  • Questions answers
    • Tips for motorized opening of gates and garage doors
  • DIY tips
    • Install a garage door opener
    • Motorize a sectional garage door
    • Portal automation
    • Solar motor for gate and garage door
    • Automatic gate opening

This may interest you


Video Instruction: Gate Opener Kit V350 AVIDSEN