Before you begin the installation, make sure you have the kit that matches the sink drain model; there are many. First, proceed to a blank assembly (without glue) on the floor. You will be able to locate the order of assembly and the orientation of the joints, being at ease! Mount all or part of the dump before installing the sink. Attention, this tip sometimes hinders the establishment of other connections (power).
Place background grids and bungs
Place the bottom grids with their gasket and center screw into each sink pan. From below, hand-screw the plugs equipped with their gasket.
Flatten the joints
With a screwdriver, tighten the center screw so that each element will flatten its seal (without forcing it). The seals seal the dump.
Place and fix the siphon
Screw the connecting tee of the siphon onto one of the bungs. Orient the fitting to the second bung. Do not force the screw on the threaded bushings as this may damage them.