Assembling several elements online is useful for connecting two work plans for example. Pose in two parts for 60 cm of panel.
Flip the panels over and take a metal square to locate the exact location of the holes used to accommodate the fitting hardware.
Use a mounting cutter (Ø35mm) to drill the two blind holes on each panel. Their depth corresponds to that of the fittings.
Use a wood chisel to dig the throat that will connect the two panels.
Work in small keys for more precision.
Insert the two panels, make sure they are aligned, unscrew the fitting fitting as far as it will go and put it into place.
With a wrench, tighten the nut until you get a flawless assembly.
Tighten one last time when the work plan is in place.
You can use a template to pinpoint the exact location of the holes to be made.
Over a wide width, two connections are necessary.