The Content Of The Article:

Invisible sanitary silicone gasket

In contrast to white sanitary silicone sealants, the "invisible" silicone sealant is translucent, which allows joints to be made invisible but also effective. In addition, it is reinforced with fungicide to prevent it from being attacked and soiled by a possible residual moisture, favorable to the development of molds.

Invisible seal at connection of materials

Invisible seal at connection of materials

Advantages
Anti-mold
Do not blacken
Does not yellow
Very easy to smooth
Do not stick to fingers
Cleaning with water stains and burrs
Extreme resistance to soiling and cleaning products
Remains waterproof and supple for a very long time

Invisible joint between floor and wall

Invisible joint between floor and wall

Destination
For seals in bathrooms, kitchens, showers, toilets.
Sanitary jointing with furniture, walls and tiles.
Adhesion on all enamelled and synthetic surfaces.
Available in 290 ml cartridge.
Hue: transparent

Invisible protection at the junction of materials

Invisible protection at the junction of materials

Preparation of the support
The bottoms must be clean, sound, dry, unfrozen, frost-free, dust-free, fat-free, compact, free of all non-adhering parts. Brush, scrape and / or dust off the support. Sanitize with DIP ANTI-FOAM. All old media must be recognized beforehand to determine the nature of the preparations.
Avoid contact with bituminous or rubbery materials.
Eliminate old joints using a cutter or DIP DECAP'JOINT.

Although invisible, the seals seal the shower

Although invisible, the seals seal the shower

Cartridge application:
-Decut the tip of the cartridge to the cutter.
- Screw the cannula.
-Decut slice the tip of the cannula to the diameter of the joint to achieve. The width of the joints must be between 5 and 25 mm.
-Introduce the cartridge into a putty gun.
-Apply a regular bead pushing forward, taking care to fill the joint to fill.
-Wrap the seal in a fresh state with a jointed dagger and wipe off the sponges with a sponge.
-Do not expose the seal to the weather in the 5 hours following installation.
-Apply a regular bead pushing forward, taking care to fill the joint to fill.
-Wrap the seal in a fresh state with a jointed dagger and wipe off the sponges with a sponge.
-For the gluing deposit by stud or cord on one of the supports and immediately assemble the surfaces, strongly press and maintain until the complete setting of the sealant.
-Cleaning of tools and equipment (fresh product): white spirit

(photos / visuals: © Dip waterproof, except special mention)

On the same topic

  • Questions answers
    • A walk-in shower: questions and answers
    • How to solve leakage problems in a shower?
  • products
    • Seals and sealants CYANOLIT
    • High performance metal gasket: joint multi-work design (Bostik)
  • DIY tips
    • How to make a quick-drying silicone sanitary seal?
    • Mastic for wall and ceiling cracks
    • Acrylic sealant for wood
    • How to make a sanitary silicone seal of color?
    • How to make an extreme white sanitary silicone seal?
    • How to make a sanitary silicone seal anti-mold?
    • Seal and grout with putty and glues
    • How to make a silicone seal in a bathroom?
    • Moldy joints around a sink or bathtub

This may interest you


Video Instruction: Clear Silicone Sealant