Before starting the installation, carefully read the assembly instructions specific to the model you have chosen. In this case, there are two fixed walls and two movable walls (narrower).
Sealing is ensured, on the one hand, by a flexible seal housed in the vertical groove of the movable walls and, on the other hand, by a silicone sealant tape, deposited along the profiles (walls and receiver).
Embed and fix
Fit the fixed wall into its anchor profile until it stops. Fix it in the holes at the top and bottom of the profile (screws are provided).
Lay the slides
So that the movable walls slide, install at the top and at the bottom of the profiles the plastic slides. They are fixed to the profiles with small stainless steel screws.
Nest the cache
At right angles to the installation, cover profiles and rails with a plastic cover. This one fits by a simple pressure of the hand.