The Content Of The Article:

Lacquered paint

The lacquering of the walls is the most common decoration of a kitchen. This paint fits well in such a room because it is easy to wash and has a perfectly clean surface. However, lacquering a wall is a fairly delicate operation: the imperfections of the bottom or the application stand out more than with any other painting.

Necessary material

  • Knife to coat
  • Triangular scraper
  • Sanding wedge
  • Orbital sander
  • mixer
  • Sponge
  • Brush
  • Roller
  • Stool
  • coating
  • Dry abrasive paper
  • Sandpaper with water

Steps

  1. Preparation
  2. Application

Preparation

Any cracks are closed

Any cracks are closed

1. Coat the wall with a coating knife to remove any cracks and irregularities in the substrate. Open each crack with a triangular scraper before resealing. It is possible to apply a coating with water, but a greasy, opacifying and waterproof coating, more appropriate, allows to obtain a perfectly flat and even surface. Cross the passes of the plaster knife to apply a thin and even layer. To check the flatness of the application, work under a grazing light. Let it dry for at least 24 hours. If the wall is friable, use a hardener type like bottom saturator.

The irregularities are removed by sanding

The irregularities are removed by sanding

2. Sand the entire surface of the substrate with a sanding block. Begin the work with sandpaper or medium-grit sandpaper and finish with fine grain. If you operate on a large surface, equip yourself with an orbital (flatbed) sander, preferably with a circular sander, which is more difficult to handle. If there are still irregularities, pass a second coat of plaster. After sanding, carefully dust off the walls with a brush or vacuum cleaner.

Using a mixer

Using a mixer

3. Mix the paint and colorant using a mixer (accessory to be mounted on a drill). The first layer should be diluted with the appropriate solvent (see the directions given by the paint manufacturer). You can also tint your painting on demand or choose from the ranges offered, a shade made in the factory, easier to find.

Application

The paint is first applied in the corners

The paint is first applied in the corners

4. Using a brush, start the application in the corners of the room, flush with the ceiling and skirting boards. "Pull" the paint on the support: do not reload the brush before having completely wrung it on the wall, it avoids a bad adhesion.

The painting is drawn to the maximum

The painting is drawn to the maximum

5. Roll the paint by crossing the passages and pulling the paint as much as possible. Apply a second coat without solvent, after drying the first one. In order to achieve a perfect result, sand the first layer with a very fine sandpaper dipped in water (this paper is used for sanding car bodies). But you will have to carefully clean the rack and let it dry before you go through the next layer.

A third layer may be necessary

A third layer may be necessary

6. If necessary, pass a third layer, after drying the second. Professional painters place the paint bucket in a container of hot water before applying the last coat: this gives a more "tense" appearance to the paint.

Lacquered paint: layer

On the same topic

  • DIY tips
    • Choosing a wall covering to paint
    • Paint a door with a lacquer
    • How to choose and use drugstore products
    • Vinyl wallcovering (PVC)
    • Vinyl paper on old lacquered paints
    • How to paint with a brush?
    • Painting, preparation
    • Painting: work organization
    • Stripping of paints
  • Questions answers
    • Are there bright paintings?
  • Forum
    • make a painting shiny

This may interest you

Lacquered paint

FAQ - 💬

❓ What is lacquered paint?

👉 Lacquer paint is a colored or colorless painting process, known for its high gloss, mostly applied to wooden or laminate surfaces. Lacquer paint is the name of the completely covering painting process so that there is no wood grain or pattern.

❓ Is lacquer A good paint?

👉 Lacquer is hard and durable, and has traditionally been used as a topcoat. If your cabinets were factory-finished, they were probably done with lacquer. It also dries incredibly quickly, so we can spray multiple coats in one day (so you can get back to your new kitchen faster).

❓ Is lacquer paint waterproof?

👉 Polyurethane, varnish, and lacquer are tried-and-true sealants with excellent waterproofing properties. They're either brushed or sprayed onto clean, sanded wood and then allowed to dry completely, prior to the piece being lightly re-sanded and recoated.

❓ What is lacquer spray paint used for?

👉 About Lacquer Spray Rust-Oleum® Specialty Lacquer Spray adds an ultra-hard, factory-like finish to furniture and accessories. Apply to wood, metal, plaster, masonry or unglazed ceramic. Hardens to high luster.

❓ How long does lacquer paint last?

👉 How long does lacquer paint last? Three years is a safe number, but the truth is that older coatings, properly stored, may be viable much longer, though shelf life varies from one finish to another. Nitrocellulose lacquer can last indefinitely, and even decades-old lacquer is usually just fine.

❓ Is lacquer paint shiny?

👉 "People think lacquer is always high-gloss, but it can be satin or even duller than that," he continues. "There are amazing paints, which I consider a more economic style of that lacquer concept." If you want lustrous walls, high-gloss paint is likely the product you're looking for.

❓ What are the disadvantages of using lacquer?

👉 Cons

  • Difficult to apply (need the right equipment and a dedicated spaying area)
  • Difficult to remove scratches or dents.
  • Toxic off-gassing when first applied (safe when dry)

❓ Is lacquer stronger than paint?

👉 Lacquer Thinner vs. Lacquer thinner is more powerful than paint thinner. Lacquer thinner is so powerful that it will even soften cured, dried lacquers and other oil-based coatings.

❓ Does lacquer paint scratch easily?

👉 Although lacquer is a durable finish, it does sustain scratches – especially on tabletops. Most scratches aren't difficult to level out with fresh lacquer, but you may have a problem matching the sheen of the area you repaired with the rest of the table.

❓ Does lacquer paint last longer?

👉 As mentioned above, lacquer is very tough. It lasts longer than any of its competitors without chipping and flaking off.

❓ How long does lacquer last?

👉 Three years is a safe number, but the truth is that older coatings, properly stored, may be viable much longer, though shelf life varies from one finish to another. Nitrocellulose lacquer can last indefinitely, and even decades-old lacquer is usually just fine.

❓ What is lacquer paint and how is it used?

👉 Lacquer paint is a material containing a resin that provides a durable finish to hard-wearing surfaces such as furniture. It has a different composition from regular latex or oil-based paint, so the application is different as well. However, achieving the hard finish and shine you’re looking for isn’t difficult if you know what to do.

❓ What is Asian lacquer paint?

👉 Asian lacquer is sometimes painted with pictures, inlaid with shell and other materials, or carved, as well as dusted with gold and given other further decorative treatments. In modern techniques, lacquer means a range of clear or pigmented coatings that dry by solvent evaporation to produce a hard, durable finish.

❓ What is the difference between paint and lacquer on furniture?

👉 Lacquer vs Paint. Lacquer is a product that is used to form a protective coating over the surface of wooden furniture. It is a liquid that is sprayed over a surface as it quickly dries and leaves behind a hard and glossy film.

❓ Can I paint over lacquer without sanding?

👉 Can I Paint Over Lacquer Without Sanding? No, sanding is an essential step if you want your paint to adhere to the surface properly. Therefore, if you are looking to paint over a surface with lacquer as the finish, ensure that you sand the surface before you can go ahead with the application of the pain.


Video Instruction: How To Paint With Lacquer: Tutorial