The Content Of The Article:

Can you tell me how to repaint a polyester shell pool and the manufacturer who makes this very specific paint. I know several people who have had mishaps (blistering) after repainting their pool and I do not want to add my name to the list.

To paint a polyester shell, it must be sanded to remove the original gel coat. Wear a respirator. The pool will have to be emptied two months before this operation. Pass the pressure washer, brush the hull with diluted bleach and rinse well. Let it dry for two months, then sand. Clean again to remove dust residue and allow to dry.

Pass a coat of primer primer depending on the nature of the chosen coating (primary before the application of a new polyurethane gel coat, epoxy or polyester for swimming pool for example). Do not work below an outside temperature below 20° C.

We also use plastic paints or polymers for swimming pools based on elastic and impermeable synthetic resins.

It will be necessary to apply the product in two or three layers and to wait at least a week for impoundment.

On the same topic

  • Questions answers
    • Renovate a polyester shell pool
  • DIY tips
    • Setting up a polyester shell pool

This may interest you

Repainting a polyester shell pool

FAQ - 💬

❓ Can you paint a Fibreglass pool?

👉 Yes. Epoxy paint is the best choice of paint type for a fiberglass pool when applied to a bare, clean surface.

❓ Do you have to acid wash a pool before painting?

👉 Acid Etching and Surface Cleaning Pools. Pool surfaces must be completely clean and free from slime, scum, body and suntan oils, algae, calcium, and other surface residue before they can be satisfactorily painted or repainted.

❓ What kind of paint do you use for a swimming pool?

👉 The Best Pool Paint by Surface For concrete pools, acrylic enamel (2-3 years) or epoxy (5-8 years) are the best pool paints. For bare plaster or marcite pools, epoxies offer the best value, though for rough surfaces an epoxy primer like Gunzite is advisable. For fiberglass pools, epoxies are the best pool paints.

❓ Can you repaint a pool?

👉 You can paint your pool in about a day or two. As with nearly every other type of paint job, the secret to beautiful, long-lasting results is preparation. If you properly drain and clean the pool, the paint application itself should go fairly quickly.

❓ How much does it cost to repaint a fiberglass pool?

👉 Pool paint costs about $1 per square foot, or $1,500 per 1,000 square feet, including labor. Resurfacing an entire fiberglass pool costs about $6,500 per 1,000 square feet, depending on the resurfacing material.

❓ How much does it cost to paint a fibreglass pool?

👉 Pool painting cost varies from around $100 to $1000 or more, depending on how large your pool is, the quality of your pool paint and whether you hire professional painters. Pool painting costs for a 20 to 25 square metre area may be: $270 for two-pack epoxy paint for a fibreglass pool or unpainted cement pool.

❓ Do you need to sand a pool before painting?

👉 To get that paint really sticking, you'll want to make the surface a little rough. For most pool types, you can use diluted muriatic acid for this step. If you have a fiberglass pool, you'll need to sand the entire thing with sandpaper instead, and then clean with that TSP solution mentioned above.

❓ What should I use to clean my pool before painting?

👉 Scrub the entire pool down with a TSP (Tri-Sodium Phosphate) solution to remove all algae, oils, dirt, chalking, peeling or loose paint. It is recommended to power wash the pool during this process. Use a good hard scrubbing brush on the end of a handle to scrub the surface with.

❓ Is painting a pool a good idea?

👉 While both paint and plaster have the same shine, after the first few years, plaster wins out. As aforementioned, pool paint doesn't have the longevity that resurfacing work does – and even worse, over time, pool paint will fade, leaving your swimming pool looking dull and lifeless.

❓ What's the difference between pool paint and regular paint?

👉 Pool paint is paint that is especially made to stand up to constant exposure to water, chlorine, and UV light, and be durable enough to take minor impacts, scratches, and abrasions.

❓ What is the best Colour to paint a pool?

👉 Blue is the most common and most inviting pool color to have. From light to dark, any shade of blue looks beautiful with tile or stone accents. Choose blue if you're a fan of cool, classic pools.

❓ How to paint a fiberglass swimming pool?

👉 How to Paint a Fiberglass Swimming Pool. 1 Start with a Clean Pool. In order to paint the fiberglass swimming pool, you need to first drain it. Once all of the water has drained from the pool, ... 2 Rough it Up. 3 Use Chemical Cleaners. 4 Paint the Pool.

❓ How to paint a pool with epoxy paint?

👉 Remember to mix your paint thoroughly. Use a power drill with a mixing paddle to ensure that your pool paint is mixed properly. Epoxy paints have an additive that begins a reaction when you mix it into the paint and each batch should be used within a few hours. When painting you want to start at the deep end and work your way to the shallow end.

❓ How do you fix a chipped pool paint?

👉 Use Rubber or Epoxy pool paint solvents. Chip off a small piece of the pool paint. Rub the chip in a few ounces of one of the solvents. If it starts to dissolve within about a minute in one solvent while rubbing, it is that type of paint.

❓ Can you re-paint an old pool?

👉 It’s very important to re-paint the pool with the same type of paint that was used before. If the pool was painted with Epoxy, repaint with Epoxy, and if Rubber based paint was used, then go over it again with Rubber.


Video Instruction: How To Paint & Acid Wash A Swimming Pool - Part 1 -Acid Wash