- Traditional tile stripping
- Stripping tiling paints
- Stripping of cement on tiles
- Stripping tiling joints
Tile stripping is an essential operation, whether it is to maintain the floor to preserve its aesthetic appearance or to prepare it for renovation work. Also, there are more or less gentle methods to proceed. Description of the different forms of stripping according to the level of damage of the tiles.
Strip a tile
Traditional tile stripping
Traditional stripping is defined as a routine maintenance of the tiles, to remove the classic soiling such as footstep or grease, for example, which keeps the soil clean, but also ensures its durability in the soil. time.
Cleaning with warm soapy water, using a scrubbing brush and mop, is sufficient to remove most deposits. If some marks persist after drying, they can be targeted and removed with a small brush.
Also, there are specific products, with special properties and adapted to the type of tiles. There are thus stripping shampoos to overcome more encrusted soils, or shine cleaners, brightening and waterproofing for example.
In any case, special attention must be paid to the chemicals used and their dilution in water, with a preference for mild cleaners, so as not to damage the tiles with detergents that attack and damage the soil. Thermal scrapersThey are also to be avoided because they cause the same damage with the effect of the heat.
Stripping tiling paints
Regarding the stripping of paints on tiles, the technique is fundamentally different depending on the case.
When removing paint stains or paint coatings on tiles, specific chemicals may be used; a spatula must also be sufficient for the smallest tasks, depending on the support.
In the opposite case, if it is a question of maintaining a tiled floor renovated with a special paint, these products, just like the abrasive materials, are to be avoided at the risk of causing scratches and peeling of the paint.
Stripping of cement on tiles
In addition to paints, traces of cement are another type of frequent soiling on the tiles.
If a spatula still allows to easily remove some of these traces, others more encrusted, may persist. In this context, boiled white vinegar can be placed on the cement, before rubbing it with a brush. The operation softens the cement and allows it to be removed with a spatula. A last cleaning with soapy water is finally necessary.
These techniques can, in the same way, be used for plaster marks.
Stripping tiling joints
Finally, for tile joints, it is possible to use a wire brush to strip them. Adapted paintings also allow to recolor them, with the help of a fine brush.
To discover also:
- To paint tiling: how to proceed?
- Renovate tiling, all stages