The Content Of The Article:

Trend a few years ago, the interior walls are no longer popular... To redo a decor to the taste of the day, it is necessary to cover them to make the surface perfectly flat. To avoid hard and complicated work, Toupret offers two coatings capable of making up to 5 mm differences. Ready to use, these coatings easily apply...

Magic 'Renov and Garnish two Toupret coatings to smooth a wall plaster

Magic 'Renov and Garnish two Toupret coatings to smooth a wall plaster

Apply the coating Garnish with a coating knife

Cover the plaster with Garnir coating

Cover the plaster with Garnir coating

1 / How to spread the coating
Use a 20 cm spatula or a trowel and spread the coating thinly. Cover an area of ​​about 1 m2 then repeat the operation.

Remove the surplus

Remove the surplus

2 / Remove excess coating
Eliminate excess plaster by positioning your spatula flat against the wall.

Sand the plaster

Sand the plaster

3 / Sand the surface of the wall
Let the plaster take, then sand the surface with fine grit sandpaper.

Paint the coated wall

Paint the coated wall

4 / Painting the wall
Depending on the thickness of the plaster layer, do the painting work between 12 and 24 hours after application.

Apply Magic'Renov coating with roller and squeegee

Apply Magic 'Renov with a roller

Apply Magic 'Renov with a roller

1 / Spread the coating
Using a roller, apply Magic 'Renov Coating in a thick layer. Do this by covering surfaces of about 1m2

Skip the squeegee

Skip the squeegee

2 / Distribute the plaster
With the notched squeegee provided, spread the plaster on the wall.

Apply a second coat of plaster

Apply a second coat of plaster

3 / Apply a second coat of plaster
Allow the first coat to dry, then apply a second coat with the roller. This layer must be fine.

Smooth the coating with the squeegee

Smooth the coating with the squeegee

4 / Smooth the coating with the raclette
Use the squeegee to smooth the surface of the plaster. Do not leave too much thickness.

Sand the plaster

Sand the plaster

5 / Sand the surface of the plaster
Allow the plaster to dry, then sand off any excess thickness with a fine grit shim.

Paint the wall

Paint the wall

6 / Cover the plaster
12 hours later, dust off the surface, then paint the wall.


Video Instruction: Skim coating a plaster wall like a pro