The Content Of The Article:

The mounting on studs of a slatted terrace is very simple. The main difficulty lies in the adjustment of the pads so that they are all perfectly aligned and at the same height.

Wooden deck: laying slabs on plots

Placing the studs

Placing the studs

Preset the studs all at the same height before prepositioning them on the floor according to the size of your slabs of wood.

Wooden deck: laying slabs on plots: slabs

Use a hacksaw to cut the base of the studs against the walls.
Likewise, break the positioning fins with pliers.

Wooden deck: laying slabs on plots: laying

With a ruler and a bubble level, adjust the height of the pads. It also makes it possible to catch the irregularities of the ground.
Be precise to facilitate the task thereafter.

Laying of gratings

Laying of gratings

Position the slabs. For a more harmonious result, invert the direction of the slabs a quarter of a turn each time to make a checkerboard.

Wooden deck: laying slabs on plots: deck

Then check the alignment of the first row, adjust the height of the studs if necessary by turning the adjusting rings.
Continue with the next row.

Slab on the terrace

Slab on the terrace

At the end of a terrace or against a wall, if you have to cut a slab, you must unscrew the cross reinforcement on the underside without damaging it.

Wooden deck: laying slabs on plots: laying

Mark the cutting line precisely and, with a circular saw, cut all the slab blades perfectly straight. Screw the transverse reinforcement under the slab.

Wooden deck: laying slabs on plots: laying

Place the slab on its studs.
If you have to cut a slab in the direction perpendicular to the blades, make sure you do not cut on a screw.

Securing the shore

Securing the shore

For a perfect edge finish, use a blade of the same species (or similar color).
Screw the edge blade into the reinforcements of the slabs every 40 cm approximately.

Wooden deck: laying slabs on plots

FAQ - 💬

❓ Can you lay slabs on decking?

👉 Wood decks can be covered in stone or pavers. Old wood decks can be renovated in a number of ways, ranging from stripping down the wood and refinishing it to completely revamping the entire structure to include pavers similar to what you would find on a patio.

❓ Can you lay paving slabs on a wooden frame?

👉 Paver Deck on a Wood Frame. A stone paver deck can be installed over a wood frame. If you are like most people you probably thought deck pavers could only be installed at ground level over 12"-18" of granular stone. Turns out stone is a great material obviously for its durability.

❓ Can I build a deck directly on the ground?

👉 Now here are your two options for laying your decking. You can either build it directly on the ground or square the site and build it on top of risers as a floating deck. If you lay it directly on the ground, you may find that it's more susceptible to absorbing moisture and might need additional maintenance.

❓ How do you lay decking on soil?

👉 If you're laying your deck straight onto the ground, cover the area with a layer of weed control fabric. Then add 40 mm to 50 mm of gravel on top. The other method is to create concrete pads for the deck to sit on top of. This will reduce the likelihood of moisture seeping into the frame and causing damage.

❓ Can I put pavers on top of wood deck?

👉 Travertine pavers are often installed at ground level over granular stone, but they can also be put in place over a wooden deck. Substrate systems can be used over the wooden frame so that travertine pavers can be laid right on top.

❓ Can you lay tiles on top of decking?

👉 Virtually any do-it-yourself deck flooring can be installed over hardwood. By installing outdoor tile over wood deck surfaces, you can give your old wood deck a complete makeover. Not only that, but you can actually protect your deck from further damage.

❓ How thick should sand be under slabs?

👉 Place Your Patio Slabs Make sure it sits 1-1.5cm deep in the sand, and leave a gap of roughly 1-1.5cm for the next piece. The patio slabs should fit together snugly.

❓ Do decks need footings?

👉 Large decks that are attached to the house should always have footings because they act to spread the heavy load of the deck from the surface of a support post over a large surface of the soil so the ground can adequately support it.

❓ Can I build a deck without digging holes?

👉 If you're ready to start planning, there are two great options to build a deck without digging any holes: surface deck blocks and deck foot anchors. The cheapest foundations are deck blocks, which can be purchased for less than $12.00 a piece.

❓ Do you need foundations for decking?

👉 Large decks that are attached to the house should always have footings because they act to spread the heavy load of the deck from the surface of a support post over a large surface of the soil so the ground can adequately support it.

❓ What do you put under a deck?

👉 A layer of crushed gravel, with or without plastic or weed barrier cloth, is the best choice for using under a deck. It sheds moisture instead of absorbing it, keeps the area under the deck drier, and won't decay.

❓ How to lay decking on concrete?

👉 1 Outline the size and shape of your decking. ... 2 Clear away plants, rocks and weeds, and dig down to a depth of roughly 50 mm. ... 3 Check the ground is even. ... 4 Now here are your two options for laying your decking. ... 5 The other method is to create concrete pads for the deck to sit on top of. ... More items...

❓ How to plan your decking?

👉 Planning your decking 1 Planning is really important when building a deck so the first step is to make a rough sketch of your decking design. ... 2 Decking kits offer a simple, ready to go solution for adding a deck to your garden. 3 When you've decided on the extent of your deck, draw a scale plan of the area. ... More items...

❓ How far apart should slabs of decking be?

👉 If laying slabs, arrange them in a grid pattern with each slab positioned about 1400mm from the next. These will support the timber joists that hold the boards. Use a spirit levelto make sure the deck gently slopes away from the house.

❓ How to build a decking base on sloped uneven ground?

👉 To build a decking base on sloped uneven ground: Clear the area of all grass, weeds and debris using a good quality spade Set the posts using post mix so that the top is at or slightly above the desired height Fix joists to posts at correct level using and electric screw driver and 100mm wood screws.


Video Instruction: How To Lift Decking Away From Standing Water